Texture, Traction & Durability
Flake Epoxy Flooring
Decorative vinyl flakes are broadcast into an epoxy base and sealed under a clear coat. The result is a hard-wearing, textured surface that hides dust and everyday scuffs.
What it is
A textured, hard-wearing surface built for real use
Vinyl flakes are broadcast by hand into a colored epoxy base coat while it's still wet, then locked in place and sealed under a clear top coat. The result is a surface with genuine texture — not just a printed pattern — that stands up to tires, tools, and foot traffic while blending small marks and debris into the color mix instead of showing every scuff.
- Garages
- Patios
- Utility rooms
- Workshops
- Commercial back-of-house
Comparing systems? Our guide to epoxy flooring cost in Miami covers what drives pricing, and the polyaspartic topcoat page explains the UV-stable clear coat most flake systems are sealed with.
Why it works hard
Texture, traction, and easier upkeep
Texture with traction
The flake texture adds grip compared to smooth coatings, a practical choice for areas that see water or vehicles.
Forgiving in daily use
Multi-tone blends visually disguise dust, tire marks, and small debris between cleanings.
Named color blends
Pick from blends like Domino, Nightfall, or Shoreline — or ask us to combine flakes for a custom mix.
Style explorer
Explore flake blends
Tap a blend to see it closer. Ten named blends are shown here — we can also talk through combining flakes for a custom mix.
Preparation
Surface preparation
The base coat needs a clean, mechanically profiled slab to bond to. We grind the concrete, treat cracks, and clear contaminants like old sealer or oil before the flake system goes down — the same groundwork every long-lasting coating depends on.
Upkeep
Easier maintenance
Because the blend mixes multiple tones, day-to-day dust, water spots, and light scuffs are far less noticeable than on a solid color. Sweeping and occasional mopping with a mild cleaner keeps it looking the way it did on day one.
How it comes together
Installation, step by step
- 01
Consultation
Consultation
Tell us about your space by phone, WhatsApp, or the quote form. We discuss goals, finishes, and budget expectations.
- 02
Surface evaluation
Surface evaluation
We assess the existing slab — cracks, moisture, previous coatings — because the right system starts with what's under it.
- 03
Design & finish selection
Design & finish selection
Choose your finish family and colors: metallic pigment combinations, flake blends, or a custom direction for your brand.
- 04
Preparation
Preparation
Mechanical grinding, crack treatment, and cleaning create the profile the coating needs to bond permanently.
- 05
Installation
Installation
Base coats, decorative layer, and protective top coat are applied in stages, each cured before the next.
- 06
Final inspection & care guidance
Final inspection & care guidance
We walk the finished floor with you and explain simple cleaning and care so it keeps its look.
Questions
Flake epoxy FAQ
Where we install
Serving Miami-Dade, Broward & South Florida
SalasResin is a service-area business — no fixed public office, but on-site consultations and installation throughout the following cities and the areas around them.
Found a blend you like?
Tell us which flake blend caught your eye and where it's going — we'll take it from there.